Air Compressor Spare Parts 250025-500 for Sullair Oil Separator Filter
Common causes of screw air compressor oil clogging failure:
1. The surrounding environment of the screw air compressor. There are corrosive gases in the surrounding environment of the screw air compressor. For example, in some occasions, sulfide, thinner, cleaning chemicals, etc. will volatilize in the air. The high temperature of the machine itself will accelerate the oxidation of the oil. Once these gases Entering the screw air compressor system, there is a chemical reaction with the engine oil, resulting in carbon deposits and sludge, etc. Some of the impurities enter the oil circulation system and are intercepted by the oil filter, and the other part of the impurities rises to the oil with the oil-gas mixture. When the gas passes through the oil, these Impurities stay on the oil filter paper, block the filter holes, and increase the resistance of the oil, so that the oil needs to be replaced in a short period of time.
2. Qualified air filter, oil filter, and engine oil are not used, one or more of them exist. The air filter with poor filtration accuracy will prevent some dust particles in the air from being intercepted, and will directly enter the screw air compressor system, and the oil filter and oil component load will be too large, resulting in blockage; impurities and oil oxides entering the screw air compressor system , worn metal particles, etc. Due to the poor filtration accuracy of the oil filter, a part of the intercepted oil filter filter layer, another part of the impurities has been continuously in the machine until it rises to the oil, and stays in the filter layer of the oil after separation, causing the oil to be removed prematurely. Blockage: engine oil with poor oxidation resistance should not be used, even if the working time is short, it will produce carbon deposits and jelly, which will block the oil.
3. There is leakage on the pipeline between the air filter and the air inlet of the main engine. The common causes of leakage are: the air filter is not installed properly; the contact area of the air filter assembly is uneven; the contact surface between the air filter and the assembly has dirt attached to it, resulting in leakage; ; Air filter or air filter assembly rupture, etc.
4. Excessive moisture in the oil filter material will cause the filter material to swell and shrink, reducing the effective separation area of the oil, resulting in an increase in the resistance of the oil and premature blockage of the oil
| Air Compressor Models |
Part No. |
Air Compressor Models |
Part No. |
| ES 11 |
2250106-706 |
LS 20 S E 175/200HP |
250034-134 |
| ES 11 Sullube |
2250106-706 |
LS 20 S LEAK FREE |
250034-085 |
| ES 6 |
250028-033 |
LS 20 S LEAK FREE |
2250048-734 |
| ES 6 Sullube |
250028-033 |
LS 20 S Sullube |
2250048-734 |
| ES 8 |
2250106-791 |
LS 20 SRF 100 HP |
2250061-137 |
| ES 8 Sullube |
2250106-791 |
LS 20 SRF 100 HP |
2250061-138 |
| LS 10 25/30 HP |
250034-112 |
LS 20 Sullube |
2250061-138 |
| LS 10 40 |
2250121-500 |
TS 20 100HP |
250034-122 |
| LS 10 LEAK |
2250121-500 |
TS 20 100HP |
250034-134 |
| LS 12 |
250034-116 |
TS 20 125/150HP |
250034-122 |
| LS 12 |
250042-862 |
TS 20 125/150HP |
250034-134 |
| LS 12 LEAK |
2250100-755 |
TS 20 200HP |
250034-122 |
| LS 12 LEAK |
2250100-756 |
TS 20 200HP |
250034-134 |
| LS 16-75 ACAC |
250034-116 |
TS 20 250HP |
250034-122 |
| LS 16-75 ACAC |
408167-011 |
TS 20 250HP |
250034-134 |
| LS 16 100 HP |
250034-116 |
TS 32 200/250HP |
250034-122 |
| LS 16 100 HP |
250042-862 |
TS 32 200/250/300HP up to June,2002 |
250034-124 |
| 10B - 25 ACAC |
250034-112 |
BDS 11 |
68561857 |
| 16B8 - 75 WCAC |
250034-116 |
LS 16 SRF 100HP |
250034-116 |
| 16B8 - 75 WCAC |
408167-011 |
LS 16 SRF 100HP |
250042-862 |
| BDS 15 |
68561857 |
LS 16 SRF 60/75HP |
250034-116 |
| BDS 18,5 from 03/2003 |
2250121-500 |
LS 16 SRF 60/75HP |
250042-862 |
| BDS 18,5 up to 2003 |
250034-114 |
LS 16 SRF LEAK FREE 100HP |
2250100-755 |
| BDS 22 from 03/2003 |
2250121-500 |
LS 16 SRF LEAK FREE 100HP |
2250100-756 |
| BDS 22 up to 2003 |
250034-114 |
LS 16 SRF LEAK FREE 60/75HP |
2250100-755 |
| BDS 30 from 03/2003 |
2250121-500 |
LS 16 SRF LEAK FREE 60/75HP |
2250100-756 |
| BDS 30 up to 2003 |
250034-114 |
LS 20 100HP |
2250061-137 |
| BDS 37 |
250034-116 |
LS 20 100HP |
2250042-862 |
| BDS 37 |
250042-862 |
LS 20 24KT 100HP |
2250061-137 |
| BDS 45 |
250034-116 |
LS 20 24KT 100HP |
2250061-138 |
| BDS 45 |
250042-862 |
LS 20 E 125/150HP |
250034-085 |
| BDS 55 |
250034-116 |
LS 20 E 125/150HP |
2250048-734 |
| BDS 55 |
250042-862 |
LS 20 S 125/150HP |
250034-085 |
| BDS 75 |
250034-116 |
LS 20 S 125/150HP |
2250048-734 |
| BDS 75 |
250042-862 |
LS 20 S E 175/200HP |
250034-122 |
Maintenance of the oil separator
The oil separator is a component that separates the screw lubricating oil from the compressed air. Under normal operation, the service life of the oil and gas separator is about 3000 hours, but the quality of the lubricating oil and the filtering accuracy of the air affect its life,have a huge impact.
It can be seen that the maintenance and replacement cycle of the air filter element must be shortened in the harsh environment, and even the installation of a pre-air filter is considered.
The oil separator must be replaced when it expires or the pressure difference between the front and back exceeds 0.12Mpa. Otherwise, the motor will be overloaded, the oil separator will be damaged and the oil will run out.
How to repair or replace the oil separator?
- Open separator container and replace separator filter.
- Make sure the new filter is the same size as the old filter, no matter how long or short, make sure to adjust the length of the scavenger.
- Be sure to use the shim provided, as these shim contain metal conductors, which prevent the accumulation of static electricity in the separator, which may cause sparks or explosions in the separator vessel.
| A |
1622314000 |
1623051600 |
1616465600 |
2901905800 |
| 1092003018 |
1622087100 |
1625725300 |
2901006101 |
2906002000 |
| 1202641400 |
1622365600 |
1631105500 |
2901000401 |
1613800700 |
| 1612386900 |
1625725300 |
1631050200 |
2901034300 |
1625703600 |
| 1613688000 |
2911007500 |
2901043200 |
2901085800 |
1631106900 |
| 1613243300 |
1625703600 |
2901162600 |
2906009800 |
2205176172 |
| 1613692100 |
1622035101 |
2901196300 |
2906058800 |
1092200289 |
| 1613730600 |
1625481100 |
2901905600 |
1616283600 |
1202834300 |
| 1613750200 |
2202929400 |
2252631300 |
2989005100 |
1622024500 |
| 1613839700 |
2911006800 |
2901905900 |
1616283602 |
1622035101 |
| 1613839702 |
1622051600 |
2911006800 |
1616283603 |
1622062301 |
| 1613901400 |
1622062301 |
2911007500 |
2901008500 |
1622087100 |
| 1613955900 |
2901021301 |
2911011600 |
2901056622 |
1625481100 |
| 1614642300 |
6221372800 |
2911011700 |
2901162610 |
1625775300 |
| 1614905400 |
1613750200 |
2911001600 |
2901164300 |
1625775400 |
| I R |
24438426 |
39894597 |
92062132 |
C |
| 15487200 |
24572539 |
39895610 |
92699198 |
98262-33 |
| 22089551 |
24771180 |
42542787 |
92722750 |
98262-162 |
| 22219174 |
35856376 |
42841247 |
92725514 |
98262-5094 |
| 22291280 |
36723666 |
54509427 |
92735547 |
10651874 |
| 22517775 |
36762250 |
54509435 |
92754688 |
11427274 |
| 23545841 |
38008579 |
54509500 |
92754696 |
11427474 |
| 23566938 |
38008587 |
54595442 |
92765783 |
100005424 |
| 23708423 |
39737473 |
54601513 |
92890334 |
100007223 |
| 23716467 |
39831888 |
54639802 |
ATS11034 |
100007587 |
| 23716475 |
39846787 |
89202022 |
ATS19034-2 |
100014428 |
| 23782386 |
39863857 |
89213011 |
|
A10012674 |
Tips:
If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time.
Company Profile&Certifications
Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment.
Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.
Company Services
1. Provide professional advice on the design of customers; Or according to the customer's request to provide solutions.
2. All filter element will be test before delivery,
OEM and ODM order are accepted, Any kind of logo printing or design are available.
3. Good Quality + Factory Price + Quick Response + Reliable Service,is what we are trying best to offer you.
4. If you have any question, please contact us freely by E-mail or Telephone.
Company team
Our company is located in the beautiful coastal city of Qingdao,is a professional manufacturer of air compressor filters and separators,
We repect the enterprise spirit of "steadyfastness,
hard work and responsibility" and creat a good corporate environment based on the operation principle of "Integrity,reliability and innovation".
With the survival idea of "perfect technology, good service and excellent quality",
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.
We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.
Q: Are you trading company or manufacturer ?
A: We are factory, you are very welcome to visit our factory at your convenience.
Q: What products do you supply?
A: We are a professional manufacturer of air compressor filters with rich experience. Mainly supplying: Replacement and customized filters of air compressors; Air compressor parts; Line Filters; Vacuum Pump Filters; Hydraulic Filters, for many air compressor brands.
Q: Could I get some samples?
A: Yes, we can supply the sample, but the customers should bear logistics costs at first.
Q: How long is your delivery time?
A: If there is stock, the lead time is about 2 working days after we get the payment. The specific delivery time depends on models and the quantity of your order.
Q: What's Minimum Order Quantity of your air compressor part?
A: the MOQ is 1pc, need you pay for the delivery cost.
Q: Can I become an Agent / DISTRIBUTOR of FT Filter?
A: Welcome! Please confirm the cooperation details and distributor qualification requirements with us, We have full advantages on quality and competitive price.
Audited Supplier 
){kind=link}