Customized Products Ingersoll Rand Air Compressor Spare Parts 54509500 Air Oil Separator

Product Description

 

Product Description

Maintenance of the oil separator

The oil separator is a component that separates the screw lubricating oil from the compressed air. Under normal operation, the service life of the oil and gas separator is about 3000 hours, but the quality of the lubricating oil and the filtering accuracy of the air affect its life, Have a huge impact.

It can be seen that the maintenance and replacement cycle of the air filter element must be shortened in the harsh environment, and even the installation of a pre-air filter is considered.

The oil separator must be replaced when it expires or the pressure difference between the front and back exceeds 0.12Mpa.Otherwise, the motor will be overloaded, the oil separator will be damaged and the oil will run out.
 

High Quality Oil Separator 54509500 For Ingersoll Rand Compressor Oil Separator

Replacement P/N	54509500
Application	apply for  air compressor parts
Residual Oil	<3PPM
MOQ	1piece
packing	cartons with bags
Working Life	>7000h

 

How to repair or replace the oil separator?
 

• Open separator container and replace separator filter.
• Make sure the new filter is the same size as the old filter, no matter how long or short, make sure to adjust the length of the scavenger.
• Be sure to use the shim provided, as these shim contain metal conductors, which prevent the accumulation of static electricity in the separator, which may cause sparks or explosions in the separator vessel.

 

Detailed Photos

Replacement steps of the built-in oil separator:

• Stop the screw air compressor, close the outlet of the air compressor, open the drain valve, and confirm that the system has no pressure.
• Disassemble the pipeline above the oil and gas barrel, and at the same time remove the pipeline from the outlet of the pressure maintaining valve to the cooler.
• Remove the oil return pipe of the air compressor.
• Remove the fixing bolts on the oil and gas barrel, and remove the upper cover of the oil and gas barrel.
•  Remove the oil and gas separator and replace it with a new one.
• Install them in the order of removal.

 

More Products for Choose

93623759	93568301	93519866	92754688
93627941	93568301	93519866	92754688
93627941	93568319	93519874	92754696
93677219	93568319	93519874	92765783
93682771	93568335	93520773	92785328
93682771	93568335	93520773	92808286
93695179	93568343	93520781	92824473
93695179	93568343	93520781	92866508
402351012	93578292	93520799	92866508
402351012	93585958	93520799	92871326
BK2253101	93585966	93520807	92890334
BK3297202	93585966	93520807	92963396
BK3297202	93604965	93522902	93188019
BK3712300	93604965	93522902	93485407
BK3712300	93605558	93522902	93489607
BN19940	93605558	93522902	93489607
BN19940	93606390	93525657	93501807
BN20660	93606390	93568244	93504231
BN20660	93611028	93568251	93504231
BN24858	93611028	93568251	93514529
BN24858	93612844	93568269	93514529
93618759	93618171	93568269	93516342
93618858	93618171	93568277	93516342
93619898	93618718	93568277	93516441
93619898	93618718	93568293	93516441
93620037	93618270	93568293	93516862
93620037	93618270	93568301	42843805
93621514	93618759	93568301	93519866

Tips:
         This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time.

Our Advantages

 

 

• Scavenge line too short

Scavenge line does not reach into internal bowl at the base of the separator.

Result: high oil carry over

• Scavenge line too long

End of scavenge line seats against base of bowl forming a seal. No oil, or an insufficient quantity is sucked up by the scavenge line. Compressor manufacturer's gap clearance is normally 1 to 2 mm alternatively, ensure tapered cut to end of scavenge line.

Result: high oil carry over

• Scavenge line blocked with dirt

Result: high oil carry over

• Scavenge line filter blocked

Some compressor models are fitted wit a small stainless steel mesh filter at some point in the scavenge line which is to be cleaned on a regular basis. If not cleaned the filter will block resulting in no scavenge action.

Result: high oil carry over.

• Scavenge line cracked / damaged

Allows atmospheric air to be ingested and insufficient or no oil removed from separator.

Result: high oil carry over.

Company Profile

 

Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment.
Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.

  

 

Certifications

 

 

 

Packaging & Shipping

 

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory, you are very welcome to visit our factory at your convenience.

Q: What products do you supply?
A: FT Filter is a professional manufacturer of air compressor filters with rich experience. Mainly supplying: include a wide range of air compressor any filter, provide some air compressor parts such as valves, sensors, precision filter elements, air compressor lubricating oil.FT Filter support customization according to size, support printing your own brand.FT Filter offer OEM products as well as high quality replacements, for example Atlas Copco, Ingersoll Rand, Sullair, Fu Sheng, Compair, Kaeser , Kobelco, Hitachi and so on.

Q: Could I get some samples?
A: Yes, we can supply the sample, but the customers should bear logistics costs at first.

Q: How long is your delivery time?
A: If there is stock, the lead time is about 2 working days after we get the payment. The specific delivery time depends on models and the quantity of your order.

Q: What's Minimum Order Quantity of your air compressor part?
A: the MOQ is 1pc, need you pay for the delivery cost.

Q: Can I become an Agent / DISTRIBUTOR of FT Filter?

A: Welcome! Please confirm the cooperation details and distributor qualification requirements with us, We have full advantages on quality and competitive price.