OEM Kaeser 6.3566.0 Air Compressor Parts Oil Separator

• Condition: New
• Type: Oil Separator
• Place of Origin: China
• Product Name: Oil Separator
• Part Number: 6.3566.0
• Application: Kaeser Air Compressor
• Model NO.: 6.3566.0
• MOQ: 1
• Color: Picture Show
• Market: Global
• The Service Life: 4000h
• Efficiency: 99%
• HS Code: 8421399090
• Production Capacity: 10000PCS/Year

Product Description

OEM Kaeser 6.3566.0 6.3669.0 Air Compressor Parts Oil Separator

Life and fault of oil component of permanent magnet variable frequency screw air compressor

The oil content of the air compressor has a life span, because when it separates the oil and compressed air, the impurities also stay on its filter material and block the filter microhole. Only the excessive resistance increases the power consumption of the air compressor, which is not conducive to energy saving and emission reduction, so when the oil is blocked to a certain pressure, it must be replaced.

Generally, the pressure difference before and after the oil filter is 0.105 ~ 0.140MPa. When it is greater than the specified value, it should be replaced in time. The specific replacement time is 50 ~ 150h for the first use and operation, and it will need to be replaced every 1000 ~ 2000h. If the annual operation time of the air compressor is less than the rated time, the filter element should also be replaced together when changing the oil. When replacing, drain the dirty oil from the oil filter and clean the inside of the filter. When installing the filter element, attention should be paid to checking the sealing ring or gasket in the filter to prevent the by-pass of oil caused by lax sealing and the failure of the filter.

One fault is a ruptured oil and gas separator. It is shown that the oil in the screw air compressor is taken away by compressed air, and the drainage pipe of the pipeline filter has oil, and the oil level of the screw air compressor is reduced, and it is forced to stop for emergency replacement. From the fault point of view, because the oil and gas separator used is dirty, the penetration resistance of compressed air during oil and gas separation is added, and the pressure is increased, finally leading to the rupture of the oil and gas separator.

Screw type or sliding vane type air compressor and other oil injection and drop lubrication air compressor, oil flowing and oil consumption is severe. It is likely that the filter element of the oil and gas separator has failed or been damaged, commonly known as flying oil. It may be necessary to replace the filter element of the oil and gas separator and the seals in relevant positions, such as O-ring and gasket. Another possibility is that the oil separation oil filter or valve is blocked, the pipeline is damaged, and the oil can not return to the suction end after separation, resulting in the loss of lubricating oil.

 

Machine Model	Separator	Air Filter	Oil Filter
AS25/26/30/35	6.2011.0	6.2000.0	6.1985.0
AS31/36/44/47	6.2011.0	6.2055.0	6.1985.0
AS31/36/44/47 NEW	6.2011.0	6.3540.0	6.1985.0
ASD32/37/47/57	6.3669.0	6.4143.0	6.3463.0
ASK27/32/35	6.3789.0	6.4163.0	6.3463.0
AT3/4/6/8/11	6.2024.0	6.0215.0	6.1876.1
AT19/26	6.2008.0	6.2003.0	6.1985.0
AT31/36/47	6.2011.0	6.2055.0	6.1985.0
AT31/36/47 NEW	6.2011.0	6.3540.0	6.1985.0
BS44/50/51/60/61	6.2012.0	6.1996.0	6.1981.0
BS51/BS61 NEW	6.1960.0	6.2084.0	6.1981.0
BSD62/72/81	6.3569.0	6.2085.0	6.3464.0
BSD62/72/81 NEW	6.3569.0	6.4139.0	6.3464.1
CS75/76/90/91/120/121	6.2013.0	6.1997.0	6.1981.0
CS76/91/121 NEW	6.2013.0	6.2085.0	6.1981.0
CSD82/102/122	6.3571.0	6.3564.0	6.3464.1
CSD82/102/122 NEW	6.3571.0	6.4149.0	6.3464.1
CSDX137/162	6.3623.0	6.4148.0	6.3465.0
D120/150/180	6.2014.0	6.1993.0	6.1979.0
DS140/170/200/220	6.2014.0	6.1989.0	6.1979.2
DS141/171/201/241	6.2132.0	6.2182.0	6.1979.0
DSB140/141/170/200/220	6.2014.0	6.1989.0	6.1979.2
DSB141/171/201/241/281	6.2132.0	6.1989.0	6.1979.0
DSD141/171/201/241/281 NEW	6.3535.0	6.2185.0	6.1979.2
DSG140/170/200/220	6.2014.0	6.1989.0	6.1979.2
ES240/250/280/300	6.2015.0	6.1995.0	6.1979.0
ES440	6.2017.0	6.4149.0	6.3464.1
ESB250/300	6.2015.0	6.1995.0	6.1979.0
ESD251/301/351/361 NEW	6.3559.0	6.2182.0	6.3465.0
ESD441	6.3559.0	6.2182.0	6.1979.0
ESD441 NEW	6.3559.0	6.2182.0	6.3465.0
ESG240/250/280/300	6.2015.0	6.1995.0	6.1979.0
FS360/440	6.2017.0	6.1989.0	6.1979.0
FS360/440  NEW	6.2134.0	6.1989.0	6.1979.0
FSD360/440	6.2015.0	6.1989.0	6.1979.0
FSG360/440	6.2015.0	6.1989.0	6.1979.0
FSG560/440	6.2015.0	6.1995.0	6.1979.0
GS590/440	6.2134.0	6.1995.0	6.1979.0
HS690/760	6.2134.0	6.3514.0	6.1979.0
M12/12E	6.2024.0	6.0215.0	6.1901.0
M15L/15R	6.2024.0	6.3507.0	6.1876.1
M21/24H/24L/22/24/25	6.2010.0	6.2003.0	6.1985.0
M21 NEW	6.2010.0	6.3528.0	6.1985.0
M220/260	6.2132.0	6.1989.0	6.1979.1
M30/35/37	6.2011.0	6.0221.0	6.1985.1
M75	6.2012.1	6.0219.0	6.1981.0
SK11/18	6.2010.0	6.1994.0	6.1985.1
SK19/26 AIRTOWER 19/26	6.2008.1	6.2003.0	6.1985.1
SK19/26	6.1931.1	6.2003.0	6.1985.1
SK25	6.2010.0	6.1994.0	6.1985.0
SM6/8/11-12LT	6.2009.0	6.0215.0	6.1985.1
SM6/8/11-9LT	6.2024.0	6.0215.0	6.1876.1
SX3/4/6	6.2018.0	6.0215.0	6.1901.0
SX3/4/6 Sigma control	6.2024.0	6.0215.0	6.1901.0
TU11	6.1893.0	6.0215.0	6.1876.1

 

  

 

 

Advantages of direct procurement from the factory:

a. The construction period is guaranteed. Your order will be sent directly to the factory manager for classification. If there are any problems in the production process, we will communicate with you more promptly and directly.
b. The standard model products are fully stocked, and the factory always stocks standard parts products, which can be shipped directly. Customized products need to communicate with sales staff to arrange production.
c. Save your purchase costs, eliminating the cost of intermediate dealers.
d. Professional foreign trade department. The foreign trade department gets along with the products in our factory everyday, is familiar with each product, has professional product knowledge, and can choose products for you more professionally.
e. If you are interested, you are welcome to visit our factory and learn more directly about the production process of the product.
 

 

COMPANY HISTORY

Filter is an important part of compressed air treatment and can provide the clean compressed air needed to remove oil and impurities. It can be used not only in pneumatic systems and pneumatic tools, but also in food, pharmaceutical and other industries.
Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment.
Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.
 

 

COMPANY SERVICE

1. Provide professional advice on the design of customers; Or according to the customer's request to provide solutions.

2. All filter element will be test before delivery, OEM and ODM order are accepted, Any kind of logo printing or design are available.

3. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.

4. If you have any question, please contact us freely by E-mail or Telephone.

COMPANY TEAM

Our company is located in the beautiful coastal city of Qingdao, is a professional manufacturer of air compressor filters and separators, We repect the enterprise spirit of "steadyfastness, hard work and responsibility" and creat a good corporate environment based on the operation principle of "Integrity, reliability and innovation". With the survival idea of "perfect technology, good service and excellent quality" , We always adhere to customer first, aim at serving customer sincerely and touching customer with our service.We plunge ourselves to provide clear and sustainable comprssed air to our customer,meanwhile constantly pursue to save the sunning cost of compressor system for them. Profession, concentration, focus is our corporate philosophy

1. Professional online service;
2. Professional before-sales and after-sales team to deal with your question on timely;
3. We offer professional customized service(OEM);
4. Supply sample list, you only need to bear the freight;
5. Reliable logistics guarantee, cooperation for many year
 

Qingdao Futai remind you: it is recommended that users pay attention not only to the air filter itself, but also to the air filter to the inlet valve between the pipe connection sealing question.

FAQ:

Q1.What is your packing clause?
Answer:generally, we put our goods in neutral white boxes and brown cartons. Or customize any kind of packing according to your request. If you have registered a patent legally,We can put the goods in your brand packing box after receiving your authorization.
Q2.What is your payment condition?
Answer: T / T 30% as a margin, 70% before delivery.Before the balance is paid, we will show you the photos of the products and packaging.
Q3.What is your delivery condition?
Answer: EXW, FOB, CFR, CIF, DDU.
Q4.What's your delivery time?
A:Generally speaking,it takes 30 to 60 days after receiving the advance payment.The exact time of delivery depends on the items and quantities of your order.
Q5. Can you make it according to the sample?
Answer:Yes,we can produce it through your sample or technical drawings.We can build molds and fixtures.
Q6.What is your sample policy?
Answer:if we have spare parts in stock, we can provide the sample, but the customer must pay the sample cost and the cost of the sample.Express delivery cost.
Q7.Did you test all the goods before delivery?
Answer: Yes, we have 100% tests before delivery.
Q8: how do you make our business a long and good relationship?
Answer: 1. We maintain good quality and competitive price to ensure our customers benefit.