Atlas Copco OEM 1621483900 1622000900 1622310600 Air Compressor Parts Oil Seal
The screw compressor has a set of shaft sealing device, its function is to seal the extended end of the crankshaft to prevent the refrigerant gas inside the crankcase from leaking out or outside gas entering the crankcase. The compressor shaft seal structure is mainly composed of a spring seat, a spring, a movable ring, and a fixed ring. Form sealing ring. This mechanical shaft seal has three seals.
Because the working temperature of the air compressor is high, if the quality of the air compressor oil is not good or the oil is not changed in accordance with the specified time or the oil is not changed in accordance with the instructions, it may produce carbon deposition, resulting in rapid wear of the lips, poor sealing and oil leakage
Control of shaft seal pressure:
High shaft seal pressure is easy to cause steam leakage, easy to cause water in the oil, causing the deterioration of the turbine oil quality.The high pressure of shaft seal will cause the operation of the safety door of the pressure equalizing box, waste the working medium and damage the equipment.The low pressure of the shaft seal may cause the vacuum of the unit to drop, and the cold air may enter the shaft seal or even the cylinder, which will cause the cold of the shaft seal section or the cold of the cylinder, and seriously threaten the safety of the equipment.
The influence of abnormal shaft seal temperature on the unit
Shaft seal when the temperature is too high, especially in front of the unit, if the temperature is too high, can make the shaft end seal and the rotor seal period of heating, produce the local stress concentration phenomenon, resulting in a certain deformation, may lead to clearance between rotor and cylinder change, make the shaft seal leakage quantity increases, poor expansion increases, serious may be dynamic and static friction.
When the shaft seal temperature is too low, it will make the shaft end seal and the rotor seal section be cooled. Similarly, it will also produce local stress concentration phenomenon, so that the gap between the cylinder and the rotor changes, so that the shaft end leakage increases, and the expansion difference decreases.When the shaft seal temperature is too low, there may also be water in the shaft seal steam supply pipeline, so that the shaft seal steam supply pipeline water hit.In serious cases, the steam turbine is fed with water.
Temperature Sensor For Compressor |
1089057400 |
| 1089057405 |
| 1089057407 |
| 1089057428 |
| 1089057470 |
| 1089057449 |
| Pressure Sensor For Compressor |
1089057520 |
| 1089057528 |
| 1089057533 |
| 1089057551 |
| 1089057565 |
| 1089057554 |
| 1089057573 |
| 1089057578 |
| 1089957974 |
| 1089957975 |
| 1089957980 |
| Control Panel For Compressor |
1900070005 |
| 1900070008 |
| 1900071032 |
| 1900071071 |
| 1900070122 |
| 1900070123 |
| 1900070125 |
| 1900071011 |
| 1900071012 |
| Service Kit For Compressor |
2901005300 |
| 2901196100 |
| 2901194701 |
| 2901056800 |
| Oil Separator For Compressor |
1612386900 |
| 1613750200 |
| 1613243300 |
| 1613692100 |
| 1613688000 |
| 1613839700 |
| 1614642300 |
| 1622007901 |
| 1625775300 |
| 1625775400 |
| 2911011201 |
| 2911011700 |
| Oil Filter Element For Compressor |
1202800402 |
| 1513033700 |
| 1613610500 |
| 1614727300 |
| 1614806500 |
| 1622365200 |
| 1622314280 |
| 1625752500 |
| 1625752600 |
| 1622507200 |
| 1622460100 |
| 1625840300 |
| Air Filter Element For Compressor |
1030097900 |
| 1613900100 |
| 1613950300 |
| 1613243300 |
| 1613279700 |
| 1621138900 |
| 1613800400 |
| 1622855101 |
| 1613740700 |
| 1613740800 |
| 2914501700 |
| 2914501800 |
| Rubber Coupling For Compressor |
1604076100 |
| 1604140800 |
| 1604130800 |
| 1614873800 |
| 1614873900 |
The cause of oil leakage of air compressor seal:
1. Oil leakage is caused by the falling off of air compressor oil seal or defective oil seal (such as wear and tear).
2. The loosening of the air compressor spindle leads to oil seal leakage.
3. Leakage of the joint surface of the air compressor head, loosening of the inlet and return tubing joints.
4. The belt installation is too tight in the installation process of the air compressor, resulting in the wear of the spindle shoe.
5. The casting or processing of air compressor is not perfect in the production process.
The primary cause of oil leakage in screw air compressors:
The raw material or process of air compressor accessories products is not safe, and there are problems in structural design;
Improper process of the device, such as unclean appearance, damaged or displaced liner;
Uneven tightening force of the fastening nut or loose loose fall off and other causes the failure of the parts;
Sealing data after long-term use of excessive wear, aging decay, deformation and failure;
Excessive increase of lubricating oil or inconsistent oil products;
Air compressor parts combined with the surface deflection deformation, shell damage, so that lubricating oil leakage;
Vent plug, check valve blocked, because of the effect of pressure difference in the case surface, resulting in oil leakage in the thin seal.
Tips:
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
Filters are part of the air handling system and can provide the clean compressed air needed to remove oil and impurities. It can be used not only in pneumatic systems and pneumatic tools, but also in food, pharmaceutical and other industries.
Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment.
Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.
Company team
Our company is located in the beautiful coastal city of Qingdao,is a professional manufacturer of air compressor filters and separators,
We repect the enterprise spirit of "steadyfastness,hard work and responsibility" and creat a good corporate environment based on the operation principle of "Integrity,reliability and innovation".
Company team
Our company is located in the beautiful coastal city of Qingdao,is a professional manufacturer of air compressor filters and separators,
We repect the enterprise spirit of "steadyfastness,hard work and responsibility" and creat a good corporate environment based on the operation principle of "Integrity,reliability and innovation".
F.A.Q
Q: What is the online order minimum?
A: Currently our online order minimum is 1 pcs.
Q: Do you sell parts for engine driven portable air compressors too?
A: No, at this time we only carry parts for electric motor driven stationary compressors.
Q: What brands do you carry parts for?
A: We handle replacement parts for every major air compressor manufacturer such as Atlas Copco, Compair, Gardner Denver, Ingersoll Rand, Kaeser, Quincy, Sullair, Worthington and many more. If you don't see your brand listed, just give us a call and we'll try to help locate your part.
Q: How long is your delivery time?
A: If there is stock, the lead time is about 2 working days after we get the payment. The specific delivery time depends on models and the quantity of your order.
Audited Supplier 
){kind=link}