Ingersoll Rand Replacement 22205462 Air Compressors Spare Part Solenoid Valve
Portable Air Compressor Special Solenoid Valve
Electromagnetic valve (Electromagnetic valve) is an industrial equipment controlled by electromagnetic. It is an automation basic component used to control fluid. It belongs to actuator and is not limited to hydraulic and pneumatic. Used in industrial control systems to adjust the direction, flow, speed and other parameters of the medium. The solenoid valve can cooperate with different circuits to achieve the desired control, and the accuracy and flexibility of the control can be guaranteed. There are many kinds of solenoid valves. Different solenoid valves play a role in different positions of the control system. The most commonly used ones are check valves, safety valves, directional control valves, speed control valves, etc.
Working principle of magnetic valve of air compressor:
Solenoid valves can be used not only in pneumatic systems, but also in the same or similar applications in hydraulic and hydraulic systems, such as low-power, non-oil-supply small electromagnetic directional valves, seals do not need to be supplied with oil, but are discharged The gas will not pollute the environment and can be used in food, medicine, electronics and other industries.
Now, the combination of solenoid valve technology, control technology, computer technology, and electronic technology has been able to carry out a variety of complex controls. For example, solenoid valves can be applied in the field of intelligent control and wireless control technology. The solenoid valve can be controlled by electromagnetic, so it can interface with various electronic systems well, which is also one of the main reasons why it is widely used.
| 1089070202 |
1089057406 |
22124085 |
250038-666 |
| 1089070201 |
1089057416 |
39238639 |
250038-755 |
| 1089070209 |
1089057435 |
22516025 |
250038-673 |
| 1089062100 |
1089057441 |
89070213 |
02250125-665 |
| 1089070213 |
1617307782 |
99252280 |
250038-672 |
| 1089070210 |
1089057440 |
39479811 |
02250125-657 |
| 1089070214 |
1089958001 |
35583210 |
02250125-655 |
| 1089062114 |
1089063716 |
36842300 |
02250125-658 |
| 1089062109 |
1089057412 |
36842318 |
02250125-714 |
| 1089062110 |
1089057449 |
99263055 |
250037-730 |
| 1089068821 |
1089062119 |
39184841 |
250038-676 |
| 1089062119 |
1089062119 |
99260838 |
39418926 |
Selection principle
Safety:
1.Corrosive medium: Plastic solenoid valve and all stainless steel should be used; for strongly corrosive medium, the isolation diaphragm type must be used. For neutral media, a solenoid valve with a copper alloy as the valve housing material should also be used, otherwise, rust debris in the valve housing will often fall off, especially in occasions where the action is not frequent. The valve for ammonia cannot be made of copper.
2.Explosive environment: products of corresponding explosion-proof grade must be selected, and waterproof and dust-proof products should be selected for outdoor installation or dusty occasions.
3.The nominal pressure of the solenoid valve should exceed the highest working pressure in the pipe.
Installation note:
1.When installing, pay attention that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in a place where there is direct dripping or splashing water. The solenoid valve should be installed vertically upwards;
2.The solenoid valve should be guaranteed to work normally within the 15%-10% fluctuation range of the rated voltage of the power supply voltage;
3.After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. And it needs to be energized several times to make it suitable for temperature before it can be put into use;
4.The pipeline should be thoroughly cleaned before installation of the solenoid valve. The medium should be free of impurities. Install a filter before the valve;
5.When the solenoid valve fails or is cleaned, to ensure the system continues to run, a bypass device should be installed.
Tips:
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
Filters are part of the air handling system and can provide the clean compressed air needed to remove oil and impurities. It can be used not only in pneumatic systems and pneumatic tools, but also in food, pharmaceutical and other industries.
Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment.
Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.
Company team
Our company is located in the beautiful coastal city of Qingdao,is a professional manufacturer of air compressor filters and separators,
We repect the enterprise spirit of "steadyfastness,hard work and responsibility" and creat a good corporate environment based on the operation principle of "Integrity,reliability and innovation".
Company team
Our company is located in the beautiful coastal city of Qingdao,is a professional manufacturer of air compressor filters and separators,
We repect the enterprise spirit of "steadyfastness,hard work and responsibility" and creat a good corporate environment based on the operation principle of "Integrity,reliability and innovation".
F.A.Q
Q: What is the online order minimum?
A: Currently our online order minimum is 1 pcs.
Q: Do you sell parts for engine driven portable air compressors too?
A: No, at this time we only carry parts for electric motor driven stationary compressors.
Q: What brands do you carry parts for?
A: We handle replacement parts for every major air compressor manufacturer such as Atlas Copco, Compair, Gardner Denver, Ingersoll Rand, Kaeser, Quincy, Sullair, Worthington and many more. If you don't see your brand listed, just give us a call and we'll try to help locate your part.
Q: How long is your delivery time?
A: If there is stock, the lead time is about 2 working days after we get the payment. The specific delivery time depends on models and the quantity of your order.
Audited Supplier 
){kind=link}